the Exciting World of Artistic Blacksmithing
The Fundamentals of
My name is David Robertson and I have been smithing
for over 20 years now. Whew, time does fly!
I started back in 1987 with no idea of what I was doing and a need to
do everything I did on a tight budget. I started as a hobby which grew
into a hobby business, which followed into a full time business. My
smithing was at the hobby business stage while I was training as a
geological engineer. When I left school I still needed to pay the bills
and engineering jobs were not just around the corner so blacksmithing
became full time.
After 20 years I still get a thrill from taking raw material and
transforming it into something both useful and elegant, and I expect my
work to last long after I do. Few other mediums are so elegant and long
lasting. Consider this book a good solid foundation to start to explore
I have made lots of mistakes over the years but have found that a few
good books have helped me along the way. When I was starting out I
would have loved to find a book like The Fundamentals of Blacksmithing.
I wrote it with the beginner in mind. It is clearly written and
illustrated for novice blacksmiths. This is not a series of projects to
try your hand at. It is a series of techniques that build on each other
to develop your skills as a blacksmith. The techniques can be
incorporated into larger projects as you master them.
Included are plans for a small coal forge, and a small gas forge. If
you are truly interested in building a gas forge I would suggest that
you look at my Gas Forge
Construction dvd .
The video goes into much more
than the plans in the book and shows the step by step process that is
be aware, you use any information in this book at your own risk!
Smithing itself has inherent risks with it. Open flame, hot metal, bits
of metal flying around just to name a few. As we all know, anything
rewarding has a certain amount of risk to it. Take precautions and you
can develop an excellent hobby.
Smithing has seen a new dawning age in the past few years. It is a
hobby that both men and women are taking up and some are turning it
into a new career. It requires a smaller budget to start than many
other pastimes, and can (at least in the beginning) take up a smallish
amount of space.
The ebook is broken down into chapters that roughly follow my Basic and
Intermediate Blacksmithing Courses that I offer at my shop. I do
strongly feel that nothing replaces one on one instruction in the finer
points of this craft, but if you are looking to test the waters in this
ancient art The Fundamentals of
Blacksmithing is an excellent place to start.
A sampling of chapters are:
- Drawing out
- Hot Punching
- Forge Welding
- Tool Steel
- Hand Forged Knives
- Heat Treating .....and much more!
You will learn:
- How to build and maintain a proper coal fire.
- The basic tools you wil require.
- How to taper, and shoulder.
- How to twist and make scrolls.
- Effective drawing out and hot cutting.
- Hot through punching, and splitting.
- How to upset a bar, and make leaves.
- Forge welding and making tongs.
- How to work with tool steel and how to make
- and many other tips and techniques.
The ebook also discusses elements of design of a project such as
balance, movement, flow and tension.
With these fundamental techniques you will save hours of doing it the
hard way, trying to re-invent the wheel. There are many ways of
reaching the same goal in blacksmithing. Some are just faster and
easier than others.
If you have developed an interest in blacksmithing and are trying to
decide to jump in or not the book guides you through shop set up and
what to watch out for and how to save money. One the great things about
blacksmithing is that you can make many of your own tools. You reap the
benefit of learning skills when you make a tool as well as just paying
the low cost for the steel.
All of more difficult projects are based on these fundamentals. In
process you design your finished piece on paper and then decide what
techniques you will need for each element. Develop skill with that
technique on sample pieces then build your project.
Sounds simple and really it is. The only catch is that it takes time!
The Fundamentals of
Blacksmithing acts as a good refresher course for those
who have done some smithing but may have gotten a bit rusty on some
techniques. Included is a resource section which will help you locate
hard to find items.
You will find smithing a rewarding and surprisingly relaxing hobby. I
have had many retired folks take it up as hobby for the combination of
the physical activity, the rewards of producing something beautiful and
useful, and it helps to keep the mind sharp as you are always trying to
figure out the next project.
When you invest in this ebook that entitles you to free updates. I will
email you when I update the book and provide you with the new download
link. You only have the one time investment and a perpetually updated
book. Now thats good value for the money!
Clickbank sells our products - they are a trusted online retailer
specializing in digitally delivered products. Your credit card
statement will show a charge from Clk*Bank.com for $28.00
have decided to put the ebook on sale
for members only for a price of $19.97
US. This is a 29% savings on this book that
help you get started in this age old craft. You can become a member by
filling in the form below.
and you can
unsubscribe at any time
if you wish.
To Join My Free Blacksmithing
Newsletter, Discounts, and Tips
Receive Your Discount on
Fundamentals of Blacksmithing
Please fill out
Your Email or
Spam Filter For Your Login ID and Password.
To activate your account you must click
on the confirmation link sent to you in your email.
get your savings you need to log into the Members Area and go to the
Member's Discount area to buy your book, otherwise you will pay the
full price through the link below.
will need Adobe Reader to veiw the document in its pdf format. Adobe
reader is a free download and can be obtained
you have a copy of Adobe Reader you will easily be able to veiw the
document and save it to a location on your computer. The file is about
3 Mb in size and download time will vary with your connection speed. I
live in the country with only dial up available and it takes me about 6
minutes to download it. Of course with high speed and it will only be a
Download The Fundamentals of Blacksmithing Now! by clicking
the link for regular price of $28.00 US.
If you have questions about the ebook please email through Contact
if you are interested in a Library of other
informational books Click Here.
Once you pay on the Clickbank Page you will automatically be taken to the download page.
This may take 5 seconds.
Please be patient.
If by chance you
do not recieve your ebook just email me as I have a record of your
transaction, but it may take me a bit of time to get back to you.
Don't Worry It Will Get Sorted Out!
To Join Free
Membership Newsletter, Discounts, and Tips
Please fill out this form:
Your Email or
Spam Filter For Your Login ID and Password
You must click
on your confirmation link sent to you in an email to activate your
Learn How to Make Your Own Gas Forge Here